NET METERING

What is net metering?

Net metering, is a metering arrangement in which a meter is installed at the point of delivery that measures power flow in both the forward and reverse direction. At the end of the billing period, members are billed based on the sum of delivered and received power. If a member produces more energy than they consume, the kWh charge is zero and the bill will reflect the excess energy which shall be credited during the next billing period to the member at the monthly avoided energy cost per kilowatt-hour. The most recent twelve months of avoided costs are listed at the bottom of this page.  If a member uses more than they produce, they are billed for the energy used along with the monthly service charge for their applicable rate schedule.

Why net metering?

The average home consumes about 14,000 – 15,000 kWh per year. It is very possible for a member to reduce the total energy usage to zero by installing a power generation facility. Net metering encourages alternative energy sources and a greener Oklahoma.

What are the requirements?

There are some requirements in place that a potential small power producer must abide by.

The Oklahoma Corporation Commission limits installed generating capacity to 300 kW or less.  Additionally, installations that are equal to or exceed 125% of the recorded peak demand at a service location will not be eligible for net metering.

Other requirements hinge around: SAFETY! The Institute of Electrical and Electronics Engineers (IEEE) developed the governing standard for small power production facilities. IEEE Standard 1547 defines requirements necessary for a safe and effective power generator. Most all commercially available installations meet IEEE 1547 requirements but members should check before purchasing to ensure compliance. Part of IEEE 1547 addresses the requirement of installed generation to shut down when power is lost on the grid. This prevents the possibility of a back-feed that could be hazardous to line workers trying to restore power. Also required, is a lockable disconnect accessible by the Cooperative. This allows line workers to isolate the power production system from the grid if needed.

Need More Information?

Small-scale electric generation facilities range in size and type, generation medium, options and installation ease. These include solar panels and small wind turbines and are known as distributed generation (DG). Members are encouraged to research all DG options before making a commitment to purchase a system for their home or business. This includes a conversation to discuss historical energy use, interconnection details and any other aspect of a DG system.

Please call 800.256.6405 and one of our member service representatives can help you start the conversation.